For owners of an aircraft waiting for a part — FAA and EASA
No part in stock? Have one made, legally.
A bracket, a fairing, a baffle, a cable: the type certificate holder stopped making it years ago and the salvage yards are empty. In the US you may produce the part for your own aircraft; in Europe an approved maintenance organisation may fabricate it from approved data. aday-air works out which path your registration allows, gathers the design data, asks the shops that may fabricate for quotes, records the conformity check and writes the logbook entry with the part's origin on the aircraft's digital twin.
The registration mark decides. The same bracket is an owner-produced part on an N-registered aircraft and a shop-fabricated part on an OY-registered one.
N-registered · FAA
Owner-produced or mechanic-fabricated
Who decides
No approval is applied for. You become the producer by taking part in one of five ways (design data, materials, process, quality control, supervision); your A&P or repair station checks conformity to the type design, installs the part and signs the return to service. Major repairs or alterations also need approved data and FAA Form 337 with an IA.
How it goes
1Establish the design data: the original part with dimensions and material, the OEM drawing, or data acceptable to the FAA
2Decide with your mechanic whether the job is minor or major (14 CFR Part 43 Appendix A) and who produces: you (21.9(a)(5)) or the mechanic (21.9(a)(6))
3Have the part made, record your participation, let the mechanic verify conformity (43.13) and install it
Forms
No application form. Logbook entry per 14 CFR 43.9; FAA Form 337 for major work
What you get
A part that may fly on your aircraft only — never sold, never moved to another aircraft — with the design data and the conformity record in the aircraft's files
Time and fee
No authority involved and no fee; the time is the shop's.
Rules
14 CFR 21.9(a)(5), 21.9(a)(6), 43.9, 43.13, Part 43 Appendix A; FAA AC 43-18
OY- and EU-registered · EASA
Shop fabrication from approved data
Who decides
There is no owner-produced-parts route in EASA law. A Part-145 or Part-CAO maintenance organisation may fabricate a restricted range of parts for its own work order when its approval covers it and the design data allow local manufacture; it releases the part on the certificate of release to service. Standard changes and repairs follow CS-STAN; for ELA1/ELA2 aircraft the owner may accept certain non-critical parts from a manufacturer; anything else is a Part 21 design change.
How it goes
1Find the approved data that permit local manufacture (structural repair manual, instructions for continued airworthiness, maintenance manual) or the CS-STAN entry
2Choose a maintenance organisation whose approval scope and exposition cover fabrication of this kind of part — the case shows which shops declare it
3The organisation fabricates, inspects and installs within one work order and releases the aircraft on the CRS, citing the data
Forms
No application form for shop fabrication; EASA Form 1 does not apply to a part consumed in the job. A design change goes to EASA or a DOA
What you get
A CRS that references the design data and the fabrication procedure, filed in the continuing-airworthiness records
Time and fee
No authority fee on the shop path; a design change has EASA or DOA fees and weeks of lead time.
Rules
145.A.42, CAO.A.040, ML.A.501/502, 21.A.307(b)(2), CS-STAN, Part 21
Which part, which aircraft, why
Pick the part from the aircraft's digital twin or describe it. The case records what failed, why no approved part is available, and whether the part is life-limited, primary structure or a flight control — the three things that close most doors.
The case reads the registration and lays out the paths the rules allow: owner-produced or mechanic-fabricated for FAA; shop fabrication, CS-STAN, owner-accepted purchase or design change for EASA. For each: who decides, what the owner does, the steps, and the paragraphs behind them, in English and Danish.
FAA five ways of owner participation recorded on the case
EASA paths with the organisation that signs
References you can open in the regulations library
Case → Fabrication → 2 · Regulatory path
Design data, in one place
Drawings, the maintenance manual page, photos and measurements of the old part, the material spec: everything the fabricator and the inspector will need goes on the case as documents, visible to the shops you invite and to the mechanic who signs.
Upload drawings, SRM or ICA pages, measurements
Mark the data source: OEM, specimen, acceptable data
Shared with invited shops only
Case → Fabrication → 3 · Design data
Quotes from shops that may fabricate
Repair shops on aday-air declare their fabrication capabilities — machining, sheet metal, composites, welding, upholstery — and the approvals that cover them. Invite the ones that fit, compare the quotes side by side and accept one; the rest are declined for you.
Shop capabilities and approval scope on the public shop page
The inspecting mechanic records how conformity to the type design was shown. One click then writes the logbook entry — basis, design data, conformity, participation — and installs the part on the digital twin with its origin marked, so the next buyer, inspector or mechanic sees at a glance that this part was fabricated and under which rule.
Logbook entry text generated from the case, append-only
Part installed with origin code on the twin
Case resolved with the full trail: data, quotes, conformity, entry
Luftfartsloven, the BL series and the EASA rules (IR, AMC, GM) in their current consolidated versions, answered by an AI that cites the exact paragraph and starts with the conclusion. Danish or English, same corpus.
Guidance, not legal advice; the authentic text is in Lovtidende and the Official Journal.
Can I make a part for my aircraft in Denmark the way US owners do?+
No. EASA law has no owner-produced-parts route. The legal ways are fabrication by a Part-145 or Part-CAO organisation from approved data within its own work order, a CS-STAN standard change or repair, an owner-accepted part from a manufacturer for ELA1/ELA2 aircraft (not life-limited, primary structure or flight controls), or a Part 21 design change. The case shows which of these fit your part.
Who is the producer of an owner-produced part under FAA rules?+
You are, when you take part in at least one of five ways: providing the design data or a specimen, providing the materials, specifying the process, providing the quality control, or supervising the manufacture. A shop may do the actual work. Your mechanic still verifies conformity and signs the return to service, and the part may never be sold or installed on another aircraft.
Does aday-air approve the part?+
No. On the FAA path there is no approval; the mechanic's conformity check and logbook entry carry the record. On the EASA path the maintenance organisation's approval and release do. aday-air keeps the design data, the quotes, the conformity record and the entry together on the aircraft.
What about life-limited parts, structure and flight controls?+
They are flagged on the case and close the simpler paths: no owner-accepted purchase under EASA, and under FAA a part that affects primary structure or flight controls usually makes the job a major repair or alteration with approved data and Form 337. The case says so before you order anything.
What does it cost?+
The fabrication case is part of the owner tools; a free account covers one aircraft. The shop's price is in its quote. Plans and prices are on the subscription page inside your account.
Out of production is not the end of the aircraft.
Register, add the aircraft by registration, open a fabrication case and pick the part. The path step tells you what the rules allow before you spend a krone.